nav emailalert searchbtn searchbox tablepage yinyongbenwen piczone journalimg journalInfo journalinfonormal searchdiv qikanlogo popupnotification paper paperNew
2025, 05, v.41 399-407
氯功能化微孔二氧化碳吸附材料的分离性能研究
基金项目(Foundation): 广东省大学生创新创业训练项目(项目号S202310580067)
邮箱(Email): 190354050@qq.com.;
DOI: 10.16026/j.cnki.iea.2025050399
摘要:

以5-氯间苯二甲酸和4,4'-联吡啶为混合配体,分别与硝酸钴和硝酸镍反应,制备了2种微孔吸附材料(分别记为材料1和材料2)。利用XRD、XPS、TG、FTIR、气体吸附等技术对其进行表征分析。XRD、FTIR和TG结果显示,材料1具有出色的潮湿稳定性和热稳定性。孔径分析表明,2种材料均为微孔材料,且最可几孔径均为0.35 nm。吸附性能结果表明,材料1对CO2的吸附能力显著高于C_2H2、CH4、CO和N2。材料1具有的微小孔道以及功能化基团(—Cl和吡啶氢),使其对动力学直径较小的CO2(0.33 nm)表现出良好的吸附亲和力,在室温、100 kPa条件下,其对CO2/N2、CO2/CH4、CO2/CO、CO2/C_2H2的吸附选择性分别为18865、141.94、27.17和1.77。材料1对CO2具有中等的吸附热,活化、再生容易,稳定性及重复使用性能优异,是一种具有良好应用前景的CO2选择性吸附材料。

Abstract:

Two microporous adsorbents were prepared by the reaction of mixed ligands(5-chloroisophthalic acid and 4,4'-bipyridine) with cobalt nitrate(or nickel nitrate). The materials were characterized by XRD, XPS, TG, FTIR and gas adsorption. The material 1 has excellent moisture stability and thermal stability according to the XRD, FTIR, and TG results. The analysis of pore size showed that both material 1 and material 2 are microporous materials with the most probable pore size of 0.35 nm. The adsorption performance showed that the adsorption capacity of material 1 for CO2 was significantly higher than that of C_2H2, CH4, CO and N2. material 1 has a small pore and functional groups(—Cl and pyridine-H), which makes it show a good adsorption affinity for CO2 with smaller kinetic diameter(0.33 nm). At room temperature and 100 kPa, the CO2 adsorption selectivity of CO2/N2, CO2/CH4, CO2/CO and CO2/C_2H2 were 18865, 141.94, 27.17 and 1.77, respectively. The material 1 has moderate adsorption heat for carbon dioxide, easy activation and regeneration, excellent stability and reusability, so it is a good selective adsorbent for carbon dioxide.

参考文献

1周爱国,郑家乐,杨川箬,等.直接空气二氧化碳捕集技术工业化进展[J].化工进展,2024, 43(6):2928-2939.

2王晓琼,陈水挟.二氧化碳捕获材料的研究进展[J].离子交换与吸附, 2023, 39(5):381-408.

3 Maniarasu R, Rathore S K, Murugan S. A review on materials and processes for carbon dioxide separation andcapture[J]. Energy&Environment, 2023, 34(1):3-57.

4 Karimi M, Shirzad M, Silva J A C, et al. Carbon dioxide separation and capture by adsorption:A review[J].Environmental Chemistry Letters, 2023, 21:2041-2084.

5罗琳,赵子雄,申熠,等.一锅法木质素基氮硫共掺杂活性炭的制备及其超级电容器和CO2吸附性能研究[J].功能材料, 2024, 55(9):9094-9101.

6李阳,娄飞健,隋鑫,等.氨基功能化气相二氧化硅材料的制备及其吸附二氧化碳性能研究[J].无机盐工业,2024, 56(2):38-43.

7刘天祥,李蓉,李晶莹,等.胺功能化沸石吸附剂载体的结构性质对CO2吸附性能的影响[J].煤炭学报, 2024,49(6):2840-2850.

8 Li Q, Qiu C, An F, et al. Effective separation of acetylene from carbon dioxide via commensurate adsorption in amicroporous metal-organic framework[J]. Separation and Purification Technology, 2023, 324:124557.

9 Li J H, Gan Y W, Chen J X, et al. Reverse separation of carbon dioxide and acetylene in two isostructural copperpyridine-carboxylate frameworks[J]. Angewandte Chemie International Edition, 2024, 63(30):e202400823.

10 Zeng J, Fu Y, Wu Y, et al. Absolute CO2/xenon separation in ultramicropore MOF for anesthetic gases regeneration[J]. Angewandte Chemie International Edition, 2023, 62(42):e202310235.

11 Yang S Q, Krishna R, Chen H, et al. Immobilization of the polar group into an ultramicroporous metal-organicframework enabling benchmark inverse selective CO2/C2H2 separation with record C2H2 production[J]. Journal ofthe American Chemical Society, 2023, 145(25):13901-13911.

12 Kazemi A, Pordsari M A, Tamtaji M, et al. Unveiling the power of defect engineering in MOF-808 to enhanceefficient carbon dioxide adsorption and separation by harnessing the potential of DFT analysis[J]. ChemicalEngineering Journal, 2024, 494:153049.

13 Wang T, Lin E, Peng Y L, et al. Rational design and synthesis of ultramicroporous metal-organic frameworks forgas separation[J]. Coordination Chemistry Reviews, 2020, 423:213485.

14 McCormick L J, Morris S A, Slawin A M Z, et al. Coordination polymers of 5-alkoxy isophthalic acids[J]. CrystalGrowth&Design, 2016, 16(10):5771-5780.

15 Qazvini O T, Telfer S G. A robust metal-organic framework for post-combustion carbon dioxide capture[J].Journal of Materials Chemistry A, 2020, 8(24):12028-12034.

16 Chen Y, Tu S, Fu P, et al. A cobalt-based metal-organic framework for efficient separation of propene frompropane via electrostatic effect[J]. AIChE Journal, 2022, 68(8):e17730.

17 Qazvini O T, Telfer S G. MUF-16:A robust metal-organic framework for pre-and post-combustion carbon dioxidecapture[J]. ACS Applied Materials&Interfaces, 2021, 13(10):12141-12148.

18 Deng M, Yang F, Yang P, et al. A series of metal-organic frameworks built of triazolate-trinuclear and paddlewheelunits:Solid-solution framework approach for optimizing CO2 adsorption and separation[J]. Crystal Growth&Design, 2015, 15(12):5794-5801.

19 Belmabkhout Y, Bhatt P M, Adil K, et al. Natural gas upgrading using a fluorinated MOF with tuned H2S and CO2adsorption selectivity[J]. Nature Energy, 2018, 3(12):1059-1066.

20 Qazvini O T, Babarao R, Shi Z L, et al. A robust ethane-trapping metal-organic framework with a high capacity forethylene purification[J]. Journal of the American Chemical Society, 2019, 141(12):5014-5020.

21 Qazvini O T, Macreadie L K, Telfer S G. Effect of ligand functionalization on the separation of smallhydrocarbons and CO2 by a series of MUF-15 analogues[J]. Chemistry of Materials, 2020, 32(15):6744-6752.

22 Ntep T J M M, Wu W, Breitzke H, et al. Halogen functionalization of aluminium fumarate metal-organicframework via in situ hydrochlorination of acetylenedicarboxylic acid[J]. Australian Journal of Chemistry, 2019,72(10):835-841.

23 Wee L H, Vandenbrande S, Rogge S M J, et al. Chlorination of a zeolitic-imidazolate framework tunes packingand van der Waals interaction of carbon dioxide for optimized adsorptive separation[J]. Journal of the AmericanChemical Society, 2021, 143(13):4962-4968.

24 Li X Y, Song Y, Zhang C X, et al. Inverse CO2/C2H2 separation in a pillared-layer framework featuring a chlorine-modified channel by quadrupole-moment sieving[J]. Separation and Purification Technology, 2021, 279:119608.

25 Wu J, Wang Y, Xue J P, et al. Stepwise synthesis of Cl-decorated trinuclear-Cu cluster-based frameworks for C2H2/C2H4 and C2H2/CO2 separation[J]. Inorganic Chemistry, 2023, 62(49):19997-20004.

26 Han Y, Brooks D, He M, et al. Enhanced benzene adsorption in chloro-functionalized metal-organic frameworks[J]. Journal of the American Chemical Society, 2024, 146(41):28080-28087.

27 Kim K C, Yoon T U, Bae Y S. Applicability of using CO2 adsorption isotherms to determine BET surface areas ofmicroporous materials[J]. Microporous and Mesoporous Materials, 2016, 224:294-301.

28王明媚,董季玲,钟晨晨,等.氨基功能化双金属ZIF的合成及其CO2吸附性能研究[J].功能材料,2024, 55(12):12104-12111.

29沈遥,鲁恒霞,杨雄威,等.孔径匹配的胺基功能化金属有机骨架捕集烟气CO2[J].科学通报, 2024,70(14):2095-2103.

30王胜,徐文涛,崔佳铭,等. ZIF-8@GO复合材料的合成及其对CO2吸附性能[J].兰州理工大学学报, 2024,50(5):17-22.

31 Chong M W S, Argent S P, Moreau F, et al. A coordination network featuring two distinct copper(II) coordinationenvironments for highly selective acetylene adsorption[J]. Chemistry-A European Journal, 2022, 28(52):e202201188.

32 Yang H Y, Li Y Z, Shi W J, et al. A new layer-stacked porous framework showing sorption selectivity for CO2 andluminescence[J]. Dalton Transactions, 2017, 46(35):11722-11727.

33 Cheplakova A M, Kovalenko K A, Samsonenko D G, et al. Metal-organic frameworks based onoctafluorobiphenyl-4, 4'-dicarboxylate:Synthesis, crystal structure, and surface functionality[J]. DaltonTransactions, 2018, 47(10):3283-3297.

34 Jiang C, Wang X, Lu K, et al. From layered structure to 8-fold interpenetrated MOF with enhanced selectiveadsorption of C2H2/CH4 and CO2/CH4[J]. Journal of Solid State Chemistry, 2022, 307:122881.

35沈遥,鲁恒霞,潘幸迪,等.用于高效稳定吸附CO2的胺基功能化MOF-808开发及机理[J].洁净煤技术, 2024,30(10):77-87.

36 Cui H, Xie Y, Ye Y, et al. An ultramicroporous metal-organic framework with record high selectivity for inverseCO2/C2H2 separation[J]. Bulletin of the Chemical Society of Japan, 2021, 94(11):2698-2701.

37 Li Y H, Wang S L, Su Y C, et al. Microporous 2D indium metal-organic frameworks for selective CO2 capture andtheir application in the catalytic CO2-cycloaddition of epoxides[J]. Dalton Transactions, 2018, 47(28):9474-9481.

38 Cui Y, Cui X, Yang G, et al. High CO2 adsorption of ultra-small Zr-MOF nanocrystals synthesized by modulationmethod boosts the CO2/CH4 separation performance of mixed-matrix membranes[J]. Journal of MembraneScience, 2024, 689:122174.

39 Li C N, Wang S M, Tao Z P, et al. Green synthesis of MOF-801(Zr/Ce/Hf) for CO2/N2 and CO2/CH4 separation[J]. Inorganic Chemistry, 2023, 62(20):7853-7860.

40 Chen S, Lin S, Zhang L. Efficient CO2/CO separation through channel confinements in an amino-coordinatedmetal-organic framework[J]. Materials Letters, 2022, 327:133064.

41 Wang C, Chen X, Yao S, et al. Hyper-crosslinked resins modified by ferrocene for CO2/CO and CO2/CH4Separation[J]. Energy&Fuels, 2023, 37(23):18919-18927.

42 Checchetto R, De Angelis M G, Minelli M. Exploring the membrane-based separation of CO2/CO mixtures forCO2 capture and utilisation processes:Challenges and opportunities[J]. Separation and Purification Technology,2024, 346:127401.

基本信息:

DOI:10.16026/j.cnki.iea.2025050399

中图分类号:X701;TQ424

引用信息:

[1]闫鹏,陈美倩,陈志胜,等.氯功能化微孔二氧化碳吸附材料的分离性能研究[J].离子交换与吸附,2025,41(05):399-407.DOI:10.16026/j.cnki.iea.2025050399.

基金信息:

广东省大学生创新创业训练项目(项目号S202310580067)

检 索 高级检索

引用

GB/T 7714-2015 格式引文
MLA格式引文
APA格式引文