| 406 | 1 | 178 |
| 下载次数 | 被引频次 | 阅读次数 |
以二氧化钛为原料,通过水解热解法制备得到二氧化钛纳米管(TN)。采用BET分析了孔的结构,结果表明,二氧化钛纳米管的比表面积164cm2/g,孔的容积0.7cm3/g,这些参数与商业化销售的二氧化钛粉末(比表面积为40cm2/g,孔的容积为0.1cm3/g)相比较,有很大程度的提高。再以氧化石墨烯、二氧化钛纳米管、硫酸亚铁为原料,通过水热合成法制备得到锐钛二氧化钛纳米管氧化石墨烯复合水凝胶(GO-TN-H)。通过吸附等温线分析研究,研究了GO-TN-H对水中氟离子的吸附性能。研究结果表明,GO-TN-H对氟离子的最大吸附容量达到了105.59mg/g,Freundlich方程比Langmuir方程能更好地拟合其吸附行为。通过再生实验考察了氢氧化钠溶液对GO-TN-H的再生效率。结果表明,复合水凝胶在0.5mol/L的氢氧化钠溶液中,经过8h浸泡,GO-TN-H脱附率达到87.5%,达到了预期效果。
Abstract：Titania nanotubes(TN) were prepared by the hydrolysis of titanium dioxide as raw materials. BET was used to analyze the pore structure of the material. The results showed that the specific surface area of TiO2 nanotubes was164cm2/g, the pore volume was 0.7cm3/g. These parameters have a great degree of improvement compared with Titanium dioxide powder of commercial product(the specific surface area is about 40cm2/g, the pore volume was 0.1cm3/g). Hydrothermal method(GO-TN-H) could be preparared by titanium dioxide nanotubes and grapheme oxide with the reduction of ferrous sulfate. The experiment was determined by adsorption isotherm. The adsorption properties of fluorine ion in water by GO-TN-H were studied. The experimental results showed that the maximum adsorption capacity of fluoride ion by GO-TN-H was 105.59mg/g, the adsorption behavior is better fitted with Freundlich model than that of Langmuir model. The recovery efficiency of sodium hydroxide solution to GO-TN-H was determined by regeneration experiment. The results indicated that GO-TN-H desorption rate reached 87.5% by 0.5mol/L sodium hydroxide solution for 8h and achieved the desired target.
[1]陈维杰.高氟地下水的致病风险与处理技术.中国水利[J].2010,(13):49-51.
[2]金银龙,陈昌杰,陈西平,等.GB 5749-2006生活饮用水卫生标准[S].北京:中华人民共和国卫生部和中国国家标准化管理委员会,2006.
[3]吴倩,李晓凯,申亮.高氟地下水处理技术现状.辽宁化工[J].2011,40(4):355-359.
[4]卢宁,高乃云,徐斌,等.饮用水除氟技术研究的新进展.四川环境[J].2007,26(4):119-122.
[5]Mohapatra M,Anand S.Review of fluoride removal from drinking water.Journal of Environmental Management[J].2009,91(1):67-77.
[6]Chorai S,Pant K K.Investigations on the column performance of fluoride adsorption by alumina in a fixed-bed.Chem Eng J[J].2004,98:165-173.
[7]Daifullah A A M,Yakout S M,Elreefy S A.Adsorption of fluoride in aqueous solutions using kmno4-modified activated.carbon derived from steam pyrolysis of rice straw.J Hazard Mater[J].2007,(147):633-643.
[8]Bahena J L R,Cabrera A R,Valdivieso A L,et al.Fluoride adsorption ontoα-Al2O3 and its effect on the zeta potential at the alumina-aqueous electrolyte interface.Sep Sci Technol[J].2002,37(8):1973-1987.
[9]Valdivieso A L,Bahena J L R,Song S,et al.Temperature effect on the zeta potential and fluoride adsorption at theα-Al2O3/aqueous solutions interface.J Colloid Interface Sci[J].2006,298(1):1-5.
[10]Shimelis B,Zewge F,Chandravanshi B S.Removal of excess fluoride from water by aluminum hydroxide.Bull Chem Soc Ethiop[J].2006,20(1):17-34.
[11]季桂娟,赵勇胜.活性Ti O2的制备与去除地下水中氟离子(F-)性能的研究.吉林大学学报(地球科学版)[J].2006,36(1):148-152.
[12]于桂生,暴大鹏,康敏.新型氟离子吸附剂活性二氧化钛除氟的研究.天津师范大学学报(自然科学版)[J].2001,21(4):41-43.
[13]周新革,赵斯琴,长山.介孔Ti O2的合成及其对氟离子的吸附性能研究.功能材料[J].2010,41:476.
[14]Guo Changsheng,Ge Ming,Liu Lu,et al.Directed synthesis of mesoporous Ti O2microspheres:catalysts and their photocatalysis for bisphenol a degradation.Environ Sci Technol[J].2010,44(1):419-425.
[15]Xiang Q,Yu J,Jaroniec M.Synergetic effect of Mo S2 and graphene as cocatalysts for enhanced photocatalytic H2 production activity of Ti O2 nanoparticles.J Am Chem Soc[J].2012,134(15):6575-6578.
[16]彭小明,傅大放,秦庆东.竹炭表面改性对两种抗生素吸附性能的影响.东南大学学报(自然科学版)[J].2014,44(6):1271-1277.
基本信息:
DOI：10.16026/j.cnki.iea.2016050472
中图分类号:TU991.2;O647.3
引用信息:
[1]郑凯,张俊,郑兴业,等.锐钛型TiO_2纳米管与石墨烯复合水凝胶对氟离子的吸附性能研究[J].离子交换与吸附,2016,32(05):472-480.DOI:10.16026/j.cnki.iea.2016050472.
基金信息:
2015年度南京工程学院大学生实践训练计划(201511276038Y);; 南京工程学院创新基金面上项目(CKJB201410)
2016-12-14
2016-12-14
2016-12-14